[INCH – POUND]
A-A-2202A
October 2, 1997
SUPERSEDING
A-A-2202
June 7, 1990
COMMERCIAL ITEM DESCRIPTION
STAKES, WOOD
The General Services Administration has authorized the use of this
commercial item description by all federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This commercial item description (CID) covers location and hub stakes. Location stakes are intended for use in laying out foundations for buildings and other structures, and for trail marking. Hub stakes are intended for use in surveying applications such as land and building foundations.
1.2 Classification. The wood stakes shall be of the following type and length, as specified (see 6.2).
|
Type I – Location marker |
Type II – Hub, square cross – section |
||
|
Length – Inch |
(mm) |
Length – Inch |
(mm) |
|
14 |
(356) |
12 |
(305) |
|
16 |
(406) |
16 |
(406) |
|
18 |
(457) |
|
|
|
48 |
(1219) |
|
|
2. SALIENT CHARACTERISTICS
2.1 Material. Unless otherwise specified (see 6.2), the wood species shall be at the option of the manufacturer and of the type accepted within industry for the manufacture of this products.
2.2 Dressed dimensions. The stakes shall be furnished in the following dressed dimensions.
Type I – Location stakes shall be 3/4 inch (19.0 mm) thick + 1/16 inch (1.5 mm) and 1 – 1/2 inches (50.8 mm) + 1/8 inch (3.2 mm) wide.
Type II – Hub stakes shall be 1 – 1/2 inches (38.1 mm) thick and 1 – 1/2 inches (38.1 mm) wide + 1/8 inch (3.2 mm) in each dimension.
|
Beneficial comments, recommendations, additions,
deletions, clarifications, etc. and any data which may improve this document
should be sent to: General Services |
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business