MM-L-736D
accordance with MIL-L-14362.
5.
PREPARATION FOR DELIVERY
Unitizing, marking and loading. Unitizing, marking and loading shall be in accordance with
5.1
MIL-L-14362, as specified (see 6.2).
6.
NOTES
6.1
Intended use.
6.1.1
Type I. Type I hardwood lumber is intended for recutting to smaller sizes for the manufacture of
furniture and other fabricated products where a high quality appearance is essential.
6.1.2
Type II. Type II hardwood lumber is intended for use in construction work and related applications
where the material will be used essentially in the size as procured.
6.1.3
Type III. Type III hardwood lumber is intended to be used specifically for flooring.
6.2
Ordering data. Purchasers should select the preferred options permitted herein and include the following
information in procurement documents:
(a)
Title, number, and date of this specification.
(b)
Type of hardwood lumber required (see 1.2).
(c)
Species and grade required (see 3.1.1 and 3.1.2).
(d)
Size, including thickness, width and length, required (see 3.2 and 6.3).
(e)
Degree of seasoning required (see 3.3).
(f)
Moisture content required for lumber 8/4 inches in thickness (see 3.3.2.1 and 3.3.2.2).
(g)
When moisture content of type II lumber excluding A and B finish grades other than as specified is
required (see 3.3.2.2).
(h) When lumber is to be used for framing (see 3.3.2.2).
(i) Surfacing required (see 3.5).
(j) When preservative treatment is required and service conditions (see 3.6.1).
(k) When fire retardant treatment is required (see 3.6.2).
(l) When anti-stain treatment is required (see 3.6.3).
(m) Certification if other than as specified (see 3.7).
(n) Marking if other than as specified (see 3.8)
(o) Unitization level and methods (see 5.1).
6.3
Thickness, width and length. In the case of type I hardwood lumber, thickness are normally in
accordance with NHLA Rules (see MIL-HDBK-7 and U.S. Department of Agriculture Wood Handbook No. 72).
Minimum and percentages of widths and lengths of standard cutting grades may be specified. If assorted widths
or assorted lengths are ordered in the case of type II hardwood lumber, percentages of each width or length may be
specified. See the introduction to the C5500-IL Federal Supply Catalog, Lumber, Millwork, Plywood and Veneer,
for further information.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business