INCH-POUND
MM-L-736D
6 MAY 2008
SUPERSEDING
MM-L-736C
March 9, 1973
FEDERAL SPECIFICATION
LUMBER; HARDWOOD
The General Services Administration has authorized the use of this federal specification by all
federal agencies.
1.
SCOPE AND CLASSIFICATION
1.1
Scope. This specification covers commercial species and grades of hardwood lumber commercially
harvested and manufactured in the continental United States.
1.2
Classification. Hardwood lumber shall be of the following types, as specified (see 6.2):
Type I
- Standard hardwood cutting grades
Type II
- Hardwood construction lumber including boards, dimension, and timbers
Type III
- Hardwood flooring
2.
APPLICABLE DOCUMENTS
2.1
Government publications. The issues of the following documents, in effect on the date of invitation
for bids or request for proposal, form a part of this specification to the extent specified herein.
Military Specifications
MIL-L-14362
Lumber: Unitizing and loading of
MIL-L-19140
Lumber and Plywood, Fire-Retardant treated
(Copies of these documents are available online at https://assist.daps.dla.mil or from the Standardization
Document Order Desk, 700 Robins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center
Philadelphia, ATTN: DSCP-NASA, 700 Robbins Ave., Philadelphia, PA 19111-5096 or email to
dscpg&ispecomments@dla.mil. Since contact information can change, you may want to verify the currency of
this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5510
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business