A-A-1920 - Lumber, Softwood, Board
This commercial item description covers all species of softwood lumber listed in Voluntary Product Standard PS 20.
A-A-1975 - Dowel, Wood
This commercial item description covers wooden dowel rods for general purpose use.
A-A-2202 - Stakes, Wood
This commercial item description (CID) covers location and hub stakes. Location stakes are intended for use in laying out foundations for buildings and other structures, and for trail marking. Hub stakes are intended for use in surveying applications such as land and building foundations.
A-A-2208 - Lumber, Hardwood
A-A-58207 - Crossarms, Wood
This commercial item description covers treated and untreated crossarms. The crossarms shall be used for support and to space the wires on wooden telephone and electric poles.
AITC-A190.1 - Timber, Structural Glued Laminated
This standard covers minimum requirements for the production of structural glued laminated timber, including sizes and tolerances, grade combinations, lumber, adhesives and laminating.
AWI-QSGSQCP - Architectural Woodwork Quality Standards
Architectural woodwork includes all exterior and interior woodwork exposed to view in finished building, except as exempted in paragraph B below; and includes panel product, doors and high-pressure laminates.
AWPA-C1 - Timber Products-Preservative Treatment By Pressure Processes, All
AWPA-C10 - Lodgepole Pine Poles - Preservative Treatment By The Full-Length Thermal Process
AWPA-C11 - Wood Blocks For Floors And Platforms - Preservative Treatment By Pressure Processes
AWPA-C12 - Poles, Western Larch, - Full Length - Preservative Treatment By Thermal Process
AWPA-C14 - Wood For Highway Construction - Preservative Treatment By Pressure Processes
AWPA-C15 - Wood For Commercial - Residential Construction - Preservative Treatment By Pressure Processes
AWPA-C16 - Wood Used On Farms - Preservative Treatment By Pressure Processes
This test method determines the effectiveness of a finish to adhere to a typical wood door face.
AWPA-C17 - Playground Equipment Treated With Inorganic Preservatives - Preservative Treatment By Pressure Processes
AWPA-C18 - Pressure Tested Material In Marine Construction, Standard For
AWPA-C2 - Lumber, Timber, Bridge Ties And Mine Ties - Preservative Treatment By Pressure Processes
AWPA-C20 - Lumber, Structural - Fire-Retardant Treatment By Pressure Processes
AWPA-C22 - Lumber And Plywood For Permanent Wood Foundations - Preservative Treatment By Pressure Processes
AWPA-C23 - Round Poles And Posts Used In Building Construction - Preservative Treatment By Pressure Processes
AWPA-C24 - Timber Piles, Sawn, Used For Residential And Commercial Building
AWPA-C25 - Preservative Treatment By Pressure Processes - 1985
AWPA-C26 - Standard For The Preservative Treatment Of Crossarms By Non-Pressure Processes, Douglas Fir, Western Larch & Western Hemlock
AWPA-C28 - Preservative Treatment Of Structural Glued Laminated Members And Laminations Before Gluing Of Southern Pine, Pacific Coast Douglas Fir, Hemfir And Western Hemlock By The Pressure Processes, Standard For
AWPA-C29 - Lumber And Plywood To Be Used For The Harvesting, Storage And Transportation Of Food Stuffs - Preservative Treatment By Pressure Processes
AWPA-C3 - Piles-Preservative Treatment By Pressure Processes, Standard For
AWPA-C30 - Lumber, Timbers And Plywood For Cooling Towers - Preservative Treatment By Pressure Processes
AWPA-C31 - Lumber Used Out Of Contact With The Ground And Continuously Protected From Liquid Water - Treatment By Pressure Processes
AWPA-C4 - Poles - Preservative Treatment By Pressure Processes
AWPA-C5 - Posts, Fence - Preservative Treatment By Pressure Processes
This standard covers nine pressure classification of type I and type II asbestos-cement pipe, 18 inch through 42 inch (450 mm through 1,050 mm) in diameter, for underground installation to convey water in water supply service systems.
AWPA-C6 - Crossties And Switch Ties - Preservative Treatment By Pressure Process
AWPA-C7 - Western Red Cedar, Northern White Cedar And Alaska Yellow Cedar Poles - Preservative Treatment Of Incised Pole Butts By The Thermal Process
AWPA-C8 - Western Red Cedar And Alaska Yellow Cedar Poles - Preservative Treatment By The Full-Length Thermal Process
AWPA-E1 - Laboratory Evaluation To Determine Resistance To Subterranean Termites, Standard Method For
AWPA-E10 - Testing Wood Preservatives By Laboratory Soil-Block Cultures, Standard Method Of
This method covers the determination of the minimum amount of preservative that is effective in preventing decay of selected species of wood by selected fungi under optimum laboratory conditions.
AWPA-E11 - Determining The Leachability Of Wood Preservatives, Standard Method Of
This method provides for the laboratory determination of the leachability of wood preservatives expressed as a percentage of the original preservatives expressed as a percentage of the original preservative retention.
AWPA-E3 - The Calculation Of The "Performance Index" Of Preservatives In Stake And Post Tests, Standard Procedure For
This method decribes procedures for the calculation of a "Performance Index" (PI) from the scores or ratings of field tests of stake or post specimens.
AWPA-E4 - Testing Water Repellency Of Pressure Treated Wood, Standard Method Of
This method is designed to measure the dimensional stability of wood which has been pressure treated with a water-repellent preservative.
AWPA-E6 - Determining The Equilibrium Moisture Content Of Fire-Retardant Treated Wood, Standard Method For
AWPA-E7 - Wood Preservatives, Standard Method Of Evaluating, By Field Tests With Stakes
This standard method describes a specific procedure for preparing, treating, conditioning and testing wood stakes treated with preservative systems.
AWPA-E8 - Field Tests With Posts, Standard Method For
The purpose of the procedures outlined herein is to set up recommended standards for conducting outdoor tests intended to determine the relative wood preserving effectiveness and permanence of preservatives in posts planted in soil and exposed to the weather.
AWPA-F3 - Products, Round Forest, Standard Volumes Of
AWPA-M1 - The Purchase Of Treated Wood Products, Standard For
AWPA-M10 - Wood Testing Preservatives By Laboratory Soil-Block Cultures, Standard Method Of (S/S By Awpa-E10)
This method covers determination of the minimum amount of preservative that is effective in preventing decay of selected species of wood by selected fungi under optimum laboratory conditions.
AWPA-M11 - Wood Preservatives Determining The Leachability Of, Standard Method (S/S Awpa-E11)
This method provides for the laboratory determination of the leachability of wood preservatives expressed as a percentage of the original preservative retention.
AWPA-M12 - Laboratory Evaluation To Determine Resistance To Subterranean Termites, Standard Method For (S/S By Awpa-E1)
This method provides for the laboratory evaluation of treated or untreated cellulosic material for its resistance to subterranean termites.
AWPA-M13 - Poles In Service, A Guideline For The Physical Inspection Of
This guideline is designed exclusively for the detection of defects affecting the serviceability of standing wood poles.
AWPA-M14 - Laboratory, Controlled Velocity, Corrosion Tests, Standard Method Of
AWPA-M15 - Guide To Standards For Testing Plant Effluents
AWPA-M16 - The Calculation Of The "Performance Index" Of Preservatives In Stake And Post Tests, Standard Procedure For (S/S By Awpa-E3)
This method describes procedures for the calculation of a "Performance Index" (PI) from the scores or ratings of field tests of stake or post specimens.
AWPA-M17 - Miscellaneous Methods, Procedures And Information
AWPA-M18 - Water Testing Repellency Of Pressure Treated Wood, Standard Method Of (S/S By Awpa-E4)
This method is designed to measure the dimensional stability of wwd which has been pressure treated with a water-repellent preservative.
AWPA-M2 - Timber Products, Inspection Of Treated, Standard For
This standard provides a guide for purchaser's inspection at wood preserving plants.
AWPA-M20 - Fire Retardant Treated Wood, Standard Method For Determining The Equilibrium Moisture Content Of
AWPA-M3 - Standard Quality Control Procedures For Wood Preserving Plants
AWPA-M5 - Glossary Of Terms Used In Wood Preservation
The object of this glossary is to make available to members of the Association and to others interested in treated wood, a standard set of definitions of those terms used commonly in the wood preserving industry.
AWPA-M6 - Forest Products, Brands Used On
AWPA-M7 - Evaluating Wood Preservatives By Field Tests With Stakes, Standard Method Of (S/S By Awpa-E7)
This standard method describes a specfic procedure for preparing, treating, conditioning and testing wooden stakes treated with wood preservatives.
AWPB-CFP - Softwood Piling Pressure Treated For Foundation, Land And Fresh Water Applications
This procedure is applicable to round timber piling from softwood species pressure treated with the following preservatives: Creosote and Creosote-Coal Tar; Pentachlorophenol; and the Waterborne Preservatives Ammoniacal Copper Aresenate (ACA), Ammoniacal Copper Zinc Aresenate (ACZA), and Chromated Copper Aresenate-Types A, B and C (CCA-A), (CCA-B) and (CCA-C).
AWPB-CP - Pole Or Posts, Pressure Treated Round Construction, Quality Control And Inspection Procedures For
This procedure is applicable to round poles or posts pressure treated with the wood preservatives specified herein for use as supporting members in building construction where replacement would be difficult or impossible and where the anticipated use of the building requires exceptional assurance of durability.
AWPB-CTP - Poles, Pressure Treated Sawn Construction, Quality Control And Inspection Procedures For
This procedure is applicable to sawn timber five (5) inches and larger in their least dimension used as supporting members in building construction where replacement would be difficult and where anticipated use of the building requires exceptional durability.
AWPB-FDN - Lumber, Softwood, Timber And Plywood Pressure Treated With Waterborne Preservatives For Ground Contact Use In Residential And Light Commercial Foundations, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber, timber and plywood that has been pressure treated with the preservative herein specified for protection against decay and insect attack.
AWPB-FP - Post, Fence, Pressure Treated Round, Half-Round And Quarter-Round, Quality Control And Inspection Procedures For
This procedure is applicable only to round, half-round and quarter-round-fence posts pressure treated with the preservatives herein specified for protection against decay and insect attack.
AWPB-LP2 - Softwood, Lumber, Timber And Plywood, Pressure Treated With Waterborne Preservatives For Above Ground Use, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber, timber and plywood that has been pressure treated with the preservative herein specified for protection against decay and insect attack.
AWPB-LP22 - Softwood, Lumber, Timber And Plywood, Pressure Treated With Waterborne Preservatives For Ground Contact Use, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber, timber and plywood that has been pressure treated with the preservative herein specified for protection against decay and insect attack.
AWPB-LP3 - Softwood, Lumber, Timber And Plywood, Pressure Treated With Light Hydrocarbon Solvent-Penta Solution For Above Ground Use, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber, timber and plywood that has been pressure treated with the preservative herein specified for protection against decay and insect attack.
AWPB-LP33 - Lumber, Softwood, Timber & Plywood Pressure Treated With Light Hydrocarbon Solvent-Penta Solution For Ground Contact Use, Quality Control And Inspection Procedures
This procedure is applicable only to softwood lumber, timber and plywood that has been pressure treated with the preservative herein specified for protection against decay and insect attack.
AWPB-LP4 - Lumber, Softwood, Timber & Plywood Pressure Treated With Volatile Hydrocarbon Solvent-Penta Solution For Above Ground Use, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber, timber and plywood that has been pressure treated with the preservative herein specified for protection against decay and inspect attack.
AWPB-LP44 - Lumber, Softwood, Timber And Plywood Pressure Treated With Volatile Hydrocarbon Solvent Penta Solution For Ground Contact Use, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber, timber and plywood that has been pressure treated with the preservative herein specified for protection against decay and insect attack.
AWPB-LP5 - Softwood, Lumber, Timber And Plywood, Pressure Treated With Creosote Or Creosote Coal-Tar Solution For Above Ground Use, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber, timber and plywood that has been pressure treated with the preservative herein specified for protection against decay and insect attack.
AWPB-LP55 - Lumber, Softwood, Timber And Plywood Pressure Treated With Creosote Or Creosote Coal-Tar Solutions For Ground Contact Use, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber, timber and plywood that has been pressure treated with the preservative herein specified for protection against decay and insect attack.
AWPB-LP6 - Softwood, Lumber, And Timber Pressure Treated With Copper Naphthenate For Above Ground Use, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber and timber that has been pressure treated with the preservative herein specified for protection against decay and insect attack.
AWPB-LP66 - Softwood, Lumber And Timber Pressure Treated With Copper Naphthenate For Ground Contact Use, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber and timber that has been pressure treated with the preservative herein specified for protection against decay and insect attack.
AWPB-LP7 - Softwood, Lumber, Timber And Plywood, Pressure Treated With Heavy Hydrocarbon Solvent-Penta Solution For Above Ground Use, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber, timber and plywood that has been pressure treated with the preservative herein specified for protection against decay and insect attack.
AWPB-LP77 - Softwood, Lumber, Timber And Plywood, Pressure Treated With Heavy Hydrocarbon Solvent-Penta Solution For Ground Contact Use, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber, timber and plywood that has been pressure treated with the preservative herein specified for protection against decay and insect attack.
AWPB-LST - Softwood Nonstructural Landscape Timber Peeler Cores Pressure Treated With Waterborne Preservatives For Ground Contact Use, Quality Control And Inspection Procedures For
This procedure is applicable only to landscape timbers with two opposed sawn faces generally manufactured from plywood peeler cores that have been treated with the preservative herein specified for protection against decay and insect attack.
AWPB-MLP - Lumber, Softwood, Timber And Plywood Pressure Treated For Marine (Saltwater) Exposure, Quality Control And Inspection Procedures For
This procedure is applicable only to softwood lumber, timber and plywood that has been pressure treated with preservatives herein specified for protection against decay, insect attack and marine borer attack.
AWPB-MP1 - Marine Waters, Marine Piling Pressure Treated With Waterborne Preservatives And Creosote For Use In, Quality Control And Inspection Procedures For
This procedure is applicable to Southern Pine and Douglas Fir marine piling that are pressure treated with a dual treatment of waterborne preservative and a creosote preservative.
AWPB-MP2 - Marine Waters, Marine Piling Pressure Treated With Creosote For Use In, Quality Control And Inspection Procedures For
This procedure is applicable to Southern Pine and Douglas Fir marine piling that are pressure treated with a creosote preservative for use in marine waters in those areas where Limnora tripunctata attack is limited or not to be expected (primarily in Northern latitudes but with exceptions in both Northern and Southern latitudes).
AWPB-MP4 - Marine Waters, Marine Piling Pressure Treated With Waterborne Preservatives For, Quality Control And Inspection Procedures For
This procedure is applicable to Southern Pine and Douglas Fir marine piling that are pressure treated with waterborne preservative for use in marine waters.
AWPB-QCIP - Quality Control And Inspection Procedures
These Quality Control and Inspection Procedures are applicable to all pressure treated wood products under the American Wood Preservers Bureau (AWPB) monitoring overview program for protection against decay and insect attack.
HPMA-HP - Plyboard, Hardwood, Standard For (S/S By Hpva-Hp1)
This standard covers the principal types, grades, and construction of plywood made primarily with hardwood faces.
HPMA-LHF - Flooring, Laminated, Hardwood, Standard For (For Future Acquisitions Use Hpva-Lf)
This standard covers requirements for grading, moisture content, dimensions, construction, and finish of laminated hardwood flooring.
LLL-F-311 - Fiber-Board; Hard-Pressed, Structural (S/S By Lll-H-35)
MIL-B-23101 - Balsa (Ochroma)
MIL-C-12436 - Crossarm, Wood (S/S By A-A-58207)
This specification covers treated wood crossarms.
MIL-C-14469 - Crossarms, Wood, Packaging Of
MIL-C-5536 - Cedar, Aircraft, Port Orford (Supersedes An-C-72)
MIL-D-16285 - Decking, Teak-Douglas Fir, Laminating (For Ship Use) (Use Mil-W-2038)
MIL-DTL-14362 - Lumber: Unitizing And Loading Of
This specification covers the unitization and loading of lumber, including railroad ties and crossarms, for shipment (see 6.3).
MIL-F-5560 - Fir, Aircraft Noble
MIL-F-5561 - Fir, Aircraft, Douglas
MIL-H-6182 - Hemlock, Aircraft Western
MIL-L-16758 - Lumber, Scarf Jointed To Size (For Ship And Boat Use)
MIL-L-17374 - Lumber, Hardwood, Stress Grade, Philippine
MIL-L-19140 - Lumber And Plywood, Fire-Retardant Treated
This specification covers requirements for fire-retardant treated lumber and plywood, including laminated veneer lumber processed by pressure impregnation, using qualified fire-retardant chemical treatments.
MIL-L-2037 - Lumber, Oak, White And Red, For Ship And Boat Construction
This specification covers white and red oak lumber for ships and boat construction, including bending for boat and ship frames or for parts requiring bends of similar severity.
MIL-L-21276 - Lumber, Hardwood, Angelique
MIL-L-22626 - Lumber, Hardwood, Azobe (Ekki), Stress Grade And Standard Grade
MIL-L-2549 - Lumber, Hardwood, Mahogany (For Ship And Boat Construction (Use Mil-L-2594)
This specification covers mohogany hardwood lumber of high quality suitable for use in ship ad boat construction.
MIL-L-2594 - Lumber, Ship And Boat Construction, Cedar, Mahogany, And Douglas Fir
This specification covers high quality lumber of Port Orford cedar, Alaska yellow cedar, Douglas fir, and the species commercially known as mahogany, suitable for ship and boat construction.
MIL-L-2595 - Lumber, Softwood, Cedar, White, For Boat And Ship Construction
MIL-L-2646 - Lignum-Vitae
MIL-L-7970 - Lumber, Hardwood, Mahogany, Aircraft Quality
MIL-O-2548 - Oak, White, And Elm (For Bending) Superseded By Mil-L-2037C(
MIL-P-14233 - Pole, Line Construction, Wood, Treated, Wooden Line Poles, Pole Stubs, And Anchor Logs (Use Mm-P-371)
MIL-P-23613 - Piles, Wood, Pressure Treated, Marine, Douglas Fir & Southern Pine (S/S By Astm-D25 W/Awpa C1, C3, & Awpb Mp1, Mp2 & Mp4)
MIL-P-28766 - Poles, Structural Wooden, For High Frequency (Hf) Antennas
This specification covers wooden poles used as structural supports or members for HF antennas, when used in conjunction with a detailed antenna specification.
MIL-P-2931 - Poles And Sticks, (For Spars And Shores)
MIL-P-6071 - Poplar, Aircraft Yellow
MIL-S-6073 - Spruce; Aircraft
MIL-T-16098 - Teak (For Naval Shipboard Use)
MIL-T-2596 - Teak
MIL-W-13871 - Wood Blanks For Small Arms
This specification covers wood blanks for gunstocks, buttstocks, and similar small arms parts.
MIL-W-15154 - Wood Laminates, Oak (For Ship And Boat Use)
This specification covers laminated oak members for ship and boat use. Such material is suitable for use as straight and curved structural members in small craft, patrol craft, minesweepers, other wooden vessels, and for other applications where structural oak laminates with fully waterproof durable adhesive bonds are desired.
MIL-W-17445 - Wood Laminates, Pressure Treated Oak Ship And Boat Use (Use Mil-W-15154)
MIL-W-19476 - Wood, Identification Of Oak Heartwood And Sapwood And Of White And Red Oak
MIL-W-2038 - Wood Laminates, Douglas Fir (For Ship And Boat Use)
This specification covers laminated Douglas fir members for ships and boat use. Such material is suitable for use as straight and mildly curved structural members in small craft, patrol craft, minesweepers, other wooden vessels, and for other applications where structural Douglas fir laminates with fully waterproof durable adhesive bonds are desired.
MIL-W-24126 - Wood Laminates, Southern Pine (For Ship And Boat Use)
This specification covers laminated Southern pine members for ships and boat use. Such material is suitable for use as straight and curved structural members in small craft, patrol craft, minesweepers, other wooden vessels, and for other applications where structural Southern pine laminates with fully waterproof durable adhesive bonds are desired.
MIL-W-2843 - Wedge, Wood (Hardwood, Tapered)
MIL-W-2872 - Wood, Impregnated, Compressed
MIL-W-6108 - Wood, Determination Of Specific Gravity Of
MIL-W-6109 - Wood, Method For Kiln Drying
MIL-W-6110 - Wood, Determination Of Moisture Content Of (S/S By Mil-Std-1363)
MM-L-736 - Lumber; Hardwood
This specification covers commercial species and grades of hardwood lumber commercially harvested and manufactured in the continental United States.
MM-L-751 - Lumber; Softwood (S/S By Ps-20)
MM-P-371 - (
Images) Piles And Poles, Wood (S/S By Ansi 05.1 And Astm-D25)
MM-T-371 - ( Images) Tie, Railroad, Wood (Cross And Switch) (Suggested Replacement American Railway Engineering Association)
MS39268 - Tie, Railroad, Wood, Cross And Switch
MS75018 - ( Images) Stake, Wood, Antenna
NFPA-NDSWCS - Wood Construction, Supplement Design Values, National Design Specification For
This specification defines the practice to be followed in structural design with the following wood products.
NHLA-RB - Rules For The Measurement & Inspection Of Hardwood & Cypress
NN-B-350 - Block, Floor, Wood, (Hardwood; Solid, Laminated, Slat) (See Notice 1 For Replacement Information)
NN-D-570 - Dowel, Wood (S/S By A-A-1975A
NN-F-476 - Flooring, Hardwood Block (S/S By Nn-B-350)
NN-S-730 - Stakes, Wood (S/S By A-A-2202)
QPL-15154-20 - Wood Laminates, White Oak (For Ship And Boat Use)
QPL-16285-7 - Decking, Teak, Douglas-Fir, Laminated, For Ship Use (Use Mil-W-2038)
QPL-17445-3 - Wood Laminates, Pressure-Treated Oak, Ship And Boat Use
QPL-19140-79 - Lumber And Plywood, Fire-Retardant Treated (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
TT-W-00571 - Wood Preservation. Treating Practice (Refer To Awpa Book Of Standards)
This specification covers the treatment of different forms and species of wood with various preservatives.
TT-W-571 - Wood Preservation, Treating Practices (Refer To Awpa Book Of Standards)
WWPA-WLGR - Wwpa Western Lumber Grading Rules
For purpose of the National Grading Rule for Dimension Lumber, "dimension" is limited to surfaced softwood lumber of nominal thickness from 2" through 4"; and which is designed for use as framing members such as joists, planks, rafters, studs, and small timbers.
dules, Electronic, Feedback Type, Size 20-1, Series I (S/S By Sae-As81714/25)
MIL-T-81714/26 - Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 20-2, Series I (S/S By Sae-As81714/26)
MIL-T-81714/27 - Terminal Junction System, Terminal Junction Blocks, Sectional, Grounding Modules, Stud Type Mounting Series I (S/S By Sae-As81714/27)
MIL-T-81714/28 - Terminal Junction System, Terminal Junction Blocks, Grounding Modules, Integral Bracket Mounting, Series I (S/S By Sae-As81714/28)
MIL-T-81714/29 - Terminal Junction System, Bracket, Block Mounting, Series I (S/S By Sae-As81714/29)
MIL-T-81714/3 - Terminal Junction System Terminal Junction Blocks, Sectional Bussing Modules, Feedback Type, Size 16 (S/S By Sae-As81714/3)
MIL-T-81714/30 - Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Sizes 20-3, 20-4, 20-5 Vertical Mounting With Integral Bracket Series I (S/S By Sae-As81714/30)
MIL-T-81714/31 - Terminal Junction System, Terminal Junction Blocks, Electronic, Modules, Feedback Type, Sizes 20-6, 20-7, 20-8 Horizontal Mounting With Integral Bracket, Series I (S/S By Sae-As81714/31)
MIL-T-81714/4 - Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size 12, Series I (S/S By Sae-As81714/4)
MIL-T-81714/5 - Terminal Junction System, Rack Assembly, Track Feedback Type, Series I(S/S By Sae-As81714/5)
MIL-T-81714/6 - Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 22, Series I(S/S By Sae-As81714/6)
MIL-T-81714/60 - Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Series Ii (S/S By Sae-As81714/60)
MIL-T-81714/61 - Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Series Ii (S/S By Sae-As81714/61)
MIL-T-81714/62 - Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feed Back Type, Series Ii
MIL-T-81714/63 - Terminal Junction System, Terminal Junction Blocks, Sectional, Grounding Modules, Stud And Flange Type Mounting, Series Ii (S/S By Sae-As81714/63)
MIL-T-81714/64 - Terminal Junction System, Grounding Stud, Series Ii
MIL-T-81714/65 - Terminal Junction System, Terminal Junction Blocks, Sectional, Wire In-Line Junctions Series Ii (S/S By Sae-As81714/65)
MIL-T-81714/66 - Terminal Junction System, In-Line Electronic Junctions, Series Ii
MIL-T-81714/67 - Terminal Junction System, Rack Assembly, Track, Feedback Type, Series Ii (S/S By Sae-As81714/67)
MIL-T-81714/68 - Terminal Junction System, Block Mounting Bracket, Series Ii
MIL-T-81714/69 - Terminal Junction System, Block Removal Tools, Series Ii (S/S By Sae-As81714/69)
MIL-T-81714/7 - Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules,Feedthru Type, Size 20 (S/S By Sae-As81714/7)
MIL-T-81714/8 - Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 16, Series (S/S By Sae-As81714/8)
MIL-T-81714/9 - Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 12, Series I (S/S By Sae-As81714/9)
MIL-T-83454/1 - Terminal, Stud, Blind Plate, For Electrical Bonding And Grounding (Noninsulated, .112-40 Unjc-3A
MIL-T-83454/11 - Terminal, Stud, Blind, For Electrical Bonding And Grounding
MIL-T-83454/2 - Terminals, Stud, Blind, For Electrical Bonding And Grounding (Noninsulated), .138-
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business